---
title: "Guideline mounting Actuator"
slug: "guideline-mounting-actuator"
updated: 2023-01-27T09:18:27Z
published: 2023-01-27T09:18:27Z
canonical: "support.el-watch.com/guideline-mounting-actuator"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.el-watch.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Guideline mounting Actuator

## Introduction

This device is ready for use and requires only a 24VDC power supply.

![Actuator.png](https://cdn.document360.io/1fd07bb5-85b3-4217-ac59-9f87c58f1793/Images/Documentation/Actuator.png)

### Mounting the Actuator

The Actuator is intended for installation in a control cabinet or in a comparable enclosure. The device may only be operated when it has been installed. The control cabinet must meet the requirements of IEC 61010-1 in terms of protection against spread of fire and protection against electric shock or burn. Use only a power supply that meets the requirements of this specification.

![actuator](https://cdn.document360.io/1fd07bb5-85b3-4217-ac59-9f87c58f1793/Images/Documentation/actuator.png)

For external circuits connected to the Actuator the insulation must be compatible with insulation voltage (III/2) 300V or (II/2) 600V.

#### Antenna

Connect the Neuron antenna to the SMA-connector (upper right of the above image). If the cabinet is made of metal, we recommend mounting the antenna on the outside of the cabinet.

#### Connectors

Connect power supply to connector marked V+/V-, and output to CO-NO and/or CO-NC according to desired Actuator function.