---
title: "Installing mA and VDC Digitizer"
slug: "installing-ma-and-vdc-digitizer"
updated: 2021-04-23T09:00:45Z
published: 2021-04-23T09:00:45Z
canonical: "support.el-watch.com/installing-ma-and-vdc-digitizer"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.el-watch.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Installing mA and VDC Digitizer

## Introduction

Our Digitizers are excellent when you want to gather and store data from your new or excisting wired sensors. In this article we show some exampels of how to connect the Digitizers to achive correct readings. Read more about how you configure your Digitizer in the app [here](https://neuronhelp.document360.io/v1/docs/edit-sensor#digitiser-config)

### Connecting mA Digitizer to loop powered 4-20mA sensor probes

![conmA1](https://cdn.document360.io/1fd07bb5-85b3-4217-ac59-9f87c58f1793/Images/Documentation/conmA1.png)

### Connecting mA Digitizer to SRP-73 display with loop power

![conmA2](https://cdn.document360.io/1fd07bb5-85b3-4217-ac59-9f87c58f1793/Images/Documentation/conmA2.png)

### Connecting mA Digitizer to 4-20mA sensor probes with active output

![conmA3](https://cdn.document360.io/1fd07bb5-85b3-4217-ac59-9f87c58f1793/Images/Documentation/conmA3.png)

### Connecting VDC Digitizer to 0-10V sensor probes

![conVDC1](https://cdn.document360.io/1fd07bb5-85b3-4217-ac59-9f87c58f1793/Images/Documentation/conVDC1.png)

### Connecting VDC Digitizer to 0-10V sensor probes with SRP-73 powered display

![conVDC2](https://cdn.document360.io/1fd07bb5-85b3-4217-ac59-9f87c58f1793/Images/Documentation/conVDC2.png)